Cisco Nexus V9P-3 200Gigabit Ethernet Card - PCI Express 3.0 x16 - 25 GB/s Data Transfer Rate - 2 Port(s) - Optical Fiber - 100GBase-SR4, 40GBase-SR4, 40GBAse-LR4, 100GBase-LR4 - QSFP-DD - Plug-in Card
PCI Express 3.0 x16 - 25 GB/s Data Transfer Rate - 2 Port(s) - Optical Fiber - 100GBase-SR4, 40GBase-SR4, 40GBAse-LR4, 100GBase-LR4 - QSFP-DD - Plug-in Card
| Brand Name | Cisco |
| Data transfer rate | 25 GB/s |
| Environmental Certification | WEEE |
| Environmentally Friendly | Yes |
| Expansion Slot Type | QSFP-DD |
| Form factor | Plug-in Card |
| Height | 2.7" |
| Host interface | PCI Express 3.0 x16 |
| Limited Warranty | 1 Year |
| Manufacturer | Cisco Systems Inc |
| Manufacturer Part Number | NXN-V9P3-16X-9GB= |
| Manufacturer Website Address | http://www.cisco.com |
| Marketing Information | Highest-density network application card The Cisco Nexus® SmartNIC+ V9P is an FPGA-based network application card optimized for low latency and high density. The device packs a powerful 16nm Xilinx Virtex UltraScale Plus (VU9P) FPGAs with 2.5M logic cells into a compact half-height half-length PCIe 16x form factor. High-capacity and low-latency memory | An extensive memory hierarchy for complex memory-intensive applications The Xilinx VU9P FPGA (Field Programmable Gate Array) features 75Mbit of block RAM and 270Mbit of UltraRAM on chip. The Cisco Nexus SmartNIC+ V9P further incorporates an additional 9GB of DDR4 DRAM on the board for high throughput access. The DRAM is accessible via a 72-bit-wide bus for maximum performance.
The Cisco Nexus V9P-3 FPGA Application SmartNIC model performs at a higher speed reducing the compile time by 40% over the V9P model compile times that reduces project build time while increasing network uptime. The improved V9P-3 model logic performance and the faster clocked FPGA helps to eliminate any timing issues and can be programmed to reduce network latency to create a better user experience. High-bandwidth connectivity | Dual QSFP-DD ports provide up to 400Gbps of full duplex connectivity. The dual QSFP-DD ports offer high-speed 4x40GbE or 2x200GbE connectivity. Using QSFP-DD breakout cables expands the connectivity to 16x10GbE/25GbE4 connections. This high-density connectivity enables a range of high-performance directly connected network applications bypassing the need for traditional switching and multiplexing requirements. Extensive IP library | Cisco is a specialist in low-latency high-performance FPGA IP cores. We provide you the same high-speed low-latency IP blocks used in our market leading products including: - 10GbE PCS/MAC with ultra-low-latency performance
- Low-latency high-throughput PCIe DMA engine
- Timing signaling and register interfaces including I2C
- Packet field extractor and frame multiplexer (with source code)
- Asynchronous FIFO and CDC modules (with source code)
Several example designs are also provided to help get design work started and completed quickly. |
| Media Type Supported | Optical Fiber |
| Network Technology | 40GBAse-LR4 |
| Network Technology | 100GBase-LR4 |
| Network Technology | 100GBase-SR4 |
| Network Technology | 40GBase-SR4 |
| Product Line | Nexus |
| Product Model | V9P-3 |
| Product Name | Nexus V9P-3 200Gigabit Ethernet Card |
| Product Type | 200Gigabit Ethernet Card |
| Total Number of Ports | 2 |
| UPC Alternates | 889728360869 |
| Width | 6.6" |
